Rubber - CENTURY MARKERS

Century’s Nuclear Grade Stainless Steel Marker

CENTURY MARKERS — Thu, 04 Jul 2024 12:34:11 +0000

Advantages:

• Valve-action paint marker with hard aluminum body & cap on top.
• Permanent, weather-proof markings on all surfaces.
• Ink formulation doesn’t scath or adversely affects the surface being marked.
• Works on all surfaces like steel, metals, alloys, plastics, glass, concrete etc.
• Confirms to GE Standards of Nuclear Energy, GE Aircraft Engines & US Energy Research and Development Administration.
• Ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries.

Directions of Use:

• Open cap. Shake the marker well before first use.
• To push ink press the nib a few times until you see the ink on the tip.
• Put the cap back on after each use.

Caution:

• Avoid contact from eyes or flames.
• Ink is harmful if consumed.

The post Century’s Nuclear Grade Stainless Steel Marker first appeared on CENTURY MARKERS.

Century’s Pump type Metal Marker

CENTURY MARKERS — Thu, 04 Jul 2024 12:06:11 +0000

Advantages:

• Viscous ink makes Permanent, Bright & Opaque Markings on all Surfaces including metals, steel, glass, rubber, wood, concrete etc.
• Hard Aluminum body makes it difficult to break, puncture or leak compared to other tube markers.
• Rubber valve at bottom makes it very easy to use with continuous ink flow. Zero Wastage compared to Tube type markers.
• Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy & Extremely Rough Surfaces.
• 60 ml ink content (5-6 times of conventional paint markers)

Directions of Use:

• Remove Cap. For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip.
• Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow.
• As pressure reduces, press the rubber valve 2-3 times to continue writing.
• Do not press the rubber bulb when not in use as it will lead to increase ink pressure.
• Clean the tip & put the cap back on when after each use.

Caution:

• Harmful if swallowed or intentional inhalation.
• Avoid contact with eyes. Keep away from open flame.
• Please test before use.

The post Century’s Pump type Metal Marker first appeared on CENTURY MARKERS.

Century’s High Temperature Marker

CENTURY MARKERS — Thu, 04 Jul 2024 11:44:43 +0000

Advantages:

• Valve-action paint marker with hard aluminum body & a cap on top.
• Permanent & Heat-proof markings on all surfaces.
• Markings remain visible up to 500-2000 degree Celsius (930-2000 F)
• Works on all surfaces like steel, metals, alloys, plastics, glass, rubber, ceramics, concrete etc.
• Ideal for Iron & Steel Industry, Welding & Metal Cutting, Glass manufacturing, Ceramic Manufacturing, Automotive Industry, Power plants etc.

Directions of Use:

• Open cap. Shake the marker well before first use.
• To push ink press the nib a few times until you see the ink on the tip.
• Put the cap back on after each use.

Caution:

• Avoid contact from eyes or flames.
• Ink is harmful if consumed.

The post Century’s High Temperature Marker first appeared on CENTURY MARKERS.

Century’s Cold Marking Chalk

CENTURY MARKERS — Thu, 04 Jul 2024 11:31:41 +0000

Century’s Cold Marking Chalk is industrial grade chalk for marking on any surface. The chalk has an ergonomic design which makes it easy to hold & write. It can mark on any surface like glass, metal, plastic, concrete, paper, rubber, wood etc. The markings made are bright, fade proof & water-proof. They won’t not chip or peel off easily & are UV resistant. The formulation has a superior marking performance compared to other chalks and works on oily, greasy, smooth, cold, rough & even wet surfaces.

Colors Available:

YELLOW
RED
ORANGE
BLACK
BLUE
GREEN
WHITE
PINK
VIOLET

Note: Colors pink and violet are make to order

The post Century’s Cold Marking Chalk first appeared on CENTURY MARKERS.

Century’s UV Security Paint Marker

CENTURY MARKERS — Thu, 04 Jul 2024 08:21:11 +0000

Advantages:

• Valve-action paint marker with hard aluminum body & a cap on top.
• Permanent & weather proof markings on all surfaces.
• Markings are only visible under UV (Ultra Violet) or Black Light.
• Works on all surfaces like steel, metals, alloys, plastics, glass, rubber, ceramics, concrete etc.
• Ideal for Hospitality Industry, Event Industry, hospitals, hotels, army, repair workshops, security etc.

Directions of Use:

• Open cap. Shake the marker well before first use.
• To push ink press the nib a few times until you see the ink on the tip.
• Put the cap back on after each use.

Caution:

• Avoid contact from eyes or flames.
• Ink is harmful if consumed.

The post Century’s UV Security Paint Marker first appeared on CENTURY MARKERS.

Century’s Galvanizer Paint Marker

CENTURY MARKERS — Thu, 04 Jul 2024 07:43:24 +0000

Century's Galvanizer Paint Marker is an industrial grade valve action paint marker for any surface. The ink is formulated specially for galvanizing process. Once the steel has gone through the pickling process, the painted marks are removed along with the rusty steel leaving a bare surface ready for galvanizing. It's Necessary tool in galvanising steel manufacturing. It is made up of a plastic body filled with ink and felt-tip with valve action for smooth ink flow. It's Permanent, Bright, fade proof & weatherproof marking on all surfaces. This special pen is Non corrosive, Fast drying & xylene free formula. The marker works on all porous & non-porous surfaces including metal, glass, ceramic, wood, plastic, rough, smooth etc.

Tip Size: Point 2. 2.3mm Marking

Colors Available:

YELLOW
RED
ORANGE
BLACK
BLUE
GREEN
WHITE
PINK
VIOLET

Note: Colors pink and violet are make to order

The post Century’s Galvanizer Paint Marker first appeared on CENTURY MARKERS.

Century’s Fine Tip Metal Marker

CENTURY MARKERS — Sat, 29 Jun 2024 07:41:27 +0000

Advantages:

• Viscous ink makes Permanent, Bright & Opaque Markings on all surfaces including metals, steel, glass, rubber, wood, concrete etc.
• Hard Aluminum body makes it difficult to break, puncture or leak compared to other tube markers.
• Ergonomic size makes it very easy to put in a pocket & use anywhere likes a pen.
• Rubber valve at bottom makes it very easy to use with continuous ink flow. Zero Wastage compared to Tube type markers.
• Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy & Extremely Rough Surfaces.
• 30 ml ink content (5-6 times of conventional fine tip paint markers)
• Ideal for use in Welding, Metal Cutting, Automation Industry, Spare Parts, Ship Building, Construction, Dies & Moulds, Scrap, Oil & Gas Industry Pre-Cast Cement Sheets etc.

Directions of Use:

Caution:

• Harmful if swallowed or intentional inhalation.
• Avoid contact with eyes. Keep away from open flame.
• Please test before use.

The post Century’s Fine Tip Metal Marker first appeared on CENTURY MARKERS.

Century’s Bleed Thru Marker

CENTURY MARKERS — Mon, 24 Jun 2024 11:45:16 +0000

Advantages:

• Bright, Opaque & Permanent Markings on all surfaces.
• Heavy duty Tip enables marking on any surface without being damaged or leakage.
• Withstand chemical aggression & heat resistant up to 120 degrees.
• Ideal to mark on Cartons, Rolls, Chemical Drums etc.
• Zero Wastage of Ink compared to tube type markers which waste 15-20% ink.

Directions of Use:

• Open cap. Shake the marker well before first use.
• To push ink press the nib a few times until you see the ink on the tip.
• Put the cap back on after each use.

Caution:

• Avoid contact from eyes or flames.
• Ink is harmful if consumed.

The post Century’s Bleed Thru Marker first appeared on CENTURY MARKERS.

Century’s Metal Marker Tube

CENTURY MARKERS — Fri, 21 Jun 2024 10:23:40 +0000

Advantages:

• Viscous ink makes Permanent, Bright & Opaque Markings on all Surfaces including metals, steel, glass, rubber, wood, concrete etc.
• Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy & Extremely Rough Surfaces.
• 60 ml ink content (5-6 times of conventional paint markers).
• Cheap & effective alternative to paint & brush markings.
• Ideal for industrial applications like Welding, Dies & Moulds, Automation, Automobile, Construction, Precast Cement Sheets, Maintenance & Repair, Ship Building, Oil & Gas Industry etc.

Directions of Use:

• Open Cap. Hold the marker vertically at 90-degree angle and press the ball to surface to write.
• Insert the key from the bottom of the tube and roll it up as ink flow reduces.
• Clean the tip and put the cap back on after each use.
• Use before 12 months for better result.
• Drying Time: 30-45 minutes (Touch Dry in 5-7 minutes).

Caution:

• Do not fold the tube back & forth to avoid leakage and breakage.
• Harmful if swallowed or intentional inhalation.
• Avoid contact with eyes. Keep away from open flame.
• Please test before use.

The post Century’s Metal Marker Tube first appeared on CENTURY MARKERS.