• Valve-action paint marker with hard aluminum body & cap on top.
• Permanent, weather-proof markings on all surfaces.
• Ink formulation doesn’t scath or adversely affects the surface being marked.
• Works on all surfaces like steel, metals, alloys, plastics, glass, concrete etc.
• Confirms to GE Standards of Nuclear Energy, GE Aircraft Engines & US Energy Research and Development Administration.
• Ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries.

• Open cap. Shake the marker well before first use.
• To push ink press the nib a few times until you see the ink on the tip.
• Put the cap back on after each use.

• Avoid contact from eyes or flames.
• Ink is harmful if consumed.

• Viscous ink makes Permanent, Bright & Opaque Markings on all Surfaces including metals, steel, glass, rubber, wood, concrete etc.
• Hard Aluminum body makes it difficult to break, puncture or leak compared to other tube markers.
• Rubber valve at bottom makes it very easy to use with continuous ink flow. Zero Wastage compared to Tube type markers.
• Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy & Extremely Rough Surfaces.
• 60 ml ink content (5-6 times of conventional paint markers)

• Remove Cap. For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip.
• Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow.
• As pressure reduces, press the rubber valve 2-3 times to continue writing.
• Do not press the rubber bulb when not in use as it will lead to increase ink pressure.
• Clean the tip & put the cap back on when after each use.

• Harmful if swallowed or intentional inhalation.
• Avoid contact with eyes. Keep away from open flame.
• Please test before use.

• Valve-action paint marker with hard aluminum body & a cap on top.
• Permanent & Heat-proof markings on all surfaces.
• Markings remain visible up to 500-2000 degree Celsius (930-2000 F)
• Works on all surfaces like steel, metals, alloys, plastics, glass, rubber, ceramics, concrete etc.
• Ideal for Iron & Steel Industry, Welding & Metal Cutting, Glass manufacturing, Ceramic Manufacturing, Automotive Industry, Power plants etc.

• Open cap. Shake the marker well before first use.
• To push ink press the nib a few times until you see the ink on the tip.
• Put the cap back on after each use.

• Avoid contact from eyes or flames.
• Ink is harmful if consumed.

• Ergonomic design & very easy to use
• Bright, Fade-proof & Water proof markings on any surface.
• Works on oily, wet, smooth & rough surfaces.
• Ideal for temporary markings on metals, plastics, concrete, steel, wood etc.
• Applicable for Welding, Metal Forging & Cutting, Tire Industry & Construction.

• Bright & Opaque markings on all kinds of fabrics including cotton, denims, polyester, wool etc.
• Permanent, Heat-Proof, Quick drying & No bleeding.
• Resistance to Acids, Alkalis & other chemical aggressions in finishing processes.
• Markings can withstand all textile sorting / sizing and finishing processes.
• Quick identification of lots upon fabrics dyed in dark shades also.
• Most economical method of marking on gray fabrics before processing.
• Available in 3 ball-point sizes for different types of fabrics
• Ink content: 60 ml (70g)
• Key provided to squeeze out the ink from the marker for optimum utilization & smooth flow.

• Open cap.
• Insert the aluminum key provided with the marker at the bottom end of the tube & start rolling upwards for pressure.
• Mark on a 90-degree angle for smooth ink flow. Keep rolling the key as pressure reduces.
• Do not fold the tube back & forth as it could lead to puncture.
• Do not use on surfaces other than fabrics.
• Put the cap back on after use.